Ultrabond Eco Tack TX

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=klZqtER_LeA

Ultrabond Eco Tack TX+ is a solvent-free, non-staining acrylic-based adhesive designed to provide a permanently tacky film when dry, to allow the removal and replacement of carpet tiles when required. • It can also be used to prevent loose lay LVT, textile floorings and carpet underlayments from slipping or moving. For interior use only. • Use Ultrabond Eco Tack TX+ for bonding carpet tiles backed with PVC, polypropylene, fibre backed bitumen and other polymer backings. Suitable onto concrete, cementitious screeds, raised access floor panels, asphalt, terrazzo, plywood, smoothing compounds and some existing floor coverings. • Ultrabond Eco Tack TX+ is also suitable for use over underfloor heating systems (surface temperature must not exceed British Standard recommendations). The heating should be switched off at least 48 hours before and after the installation of floor covering. In areas subject to excessive variations of temperature, and floor coverings not completely dimensionally stable, care should be taken as movement may occur causing gaping. • For further product information and technical documents visit http://bit.ly/EcoTackPlus

#############################

New on site