Audi Q3 8U lower rear light removal for bulb change

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=kqkogc6kt_8

How to remove lower rear light assembly on Audi Q3 (8U) to replace W16W bulbs. Check out this tutorial and follow it in your car. Procedure is simple and it requires some basic tools: phillips screwdriver, prying tool, small suction cup. • 🛠 Pry the towing eye cover from the top, access the mounting screw from underneath, unscrew it with phillips screwdriver, use suction cups to safely remove the #light assembly, optionally disconnect the wiring, remove desired bulb holder, replace the W16W bulb, put everything back together. • ℹ️ In this video you can see me replacing white #reverse light LED with a standard bulb, because the replacement was causing blow bulb error. LED that I've used was designed not to trigger the fault code, but it seams like Audi #Q3 system is very sensitive and not all CAN-BUS ready LEDs will work in it. • 🛒 Prying tools set: http://ali4cars.com/s/?p=interior-rem... • 🛒 W16W white LEDs (not recommended for Audi Q3): http://ali4cars.com/s/?p=t15-w16w-led... • 0:00 Removing Audi Q3 lower rear lights • 0:35 Prying towing eye cover • 0:43 Locking screw location • 0:56 Removing the screw • 1:11 Removing light assembly • 1:37 Wiring and individual holders • 1:50 Reverse light W16W LED replacement • 2:20 Installing it back • ✅ http://mr-fix.info/ • ✅ Facebook: / • ✅ Instagram: / • ✅ Pinterest: /

#############################

New on site