Youtor
1편 LS산전PLCXBMDN32H2와 래더로직LD로 제어 시작해보기녹칸다의 내맘대로 PLC 시리즈튜토리얼
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=lCOm5xsN4hI
The example code is compressed and uploaded on Nockanda's blog! • https://bota.tistory.com/2172 • Nockanda's PLC series! • For this series, please create explanatory materials on the Google Slides below! (shared with everyone) • https://docs.google.com/presentation/... • Nockanda is a YouTuber who codes with Arduino! • This series has the following precautions! • 1. Nockanda does not know much about PLC (most important) • 2. A person who used to code with Arduino made materials for beginners from the perspective of looking at PLC! • 3. Therefore, there is no intention to make PLC the standard! • 4. Nockanda 's PLC CPU can be controlled with Ladder Logic (LD) and ST language! • 5. I don't understand leather logic at all, so I finished it by running only a few samples! • 6.ST language is a bit understandable, so let's make various examples based on the Arduino coding strategy! • 7. However, the content to be coded by Nockanda in the ST language is “Is it really possible to do this?” is not guaranteed, let's focus on “finally it works”! • 8. If there is an incorrect explanation during the process, please let Nockanda know. Thank you! • Let's find out how to get started with PLC for the first time today! • Two things need to be addressed! • 1. How to create a development environment by connecting a PLC to a PC? • 2. How can I make software? • Find out the necessary preparations and basic connection methods, and set up a development environment on a Windows PC! • The software has to be done in Ladder Logic (LD), but I don't know much about LD no matter how much I look at Nockanda! • Therefore, while snooping here and there, replace the contents by implementing the materials generally used when entering PLC! • The ST language, which will be used in Part 2, is the main language for Nockanda to code PLC! • It focuses on how to write ladder logic with the correct answer already and how to connect hardware to it! • Anyway, the main purpose of Part 1 is to get you started! • However, since LS PLC itself is not as cheap as Arduino, it is doubtful whether you will think I should try that too! !
#############################
