How To Install A Dishwasher FAST AND EASY Step By Step Guide

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=lPd49amPxBk

This video from Sears PartsDirect shows how to replace the detergent dispenser on a dishwasher. The dispenser in the dishwasher door houses the main wash detergent cup and the rinse aid compartment. A hinged cap covers the detergent cup until the electronic control board—or the timer, in some models—signals the cap's latch to pop open. During the last rinse, the rinse aid compartment releases a small amount of rinse aid. If you find any dispenser parts damaged or the dispenser doesn't open when activated during the cycle, you can replace it using the steps in this video. • Visit us at: • https://www.searspartsdirect.com?sid=soc:youtube:replacing-the-detergent-dispenser-on-a-dishwasher • Or call 1-800-437-1673 to speak with a parts specialist. • The video includes these parts and tools. Look up your model to make sure you get the right parts for your dishwasher. • Detergent dispenser • https://www.searspartsdirect.com/part... • Find parts for dishwasher at • https://www.searspartsdirect.com/dish... • Or click here to schedule an appointment with a repair technician. • https://www.searshomeservices.com/rep... • Transcript: • The dispenser in the dishwasher door houses the main wash detergent cup and the rinse aid compartment. A hinged cap covers the detergent cup until the electronic control board—or the timer, in some models—signals the cap's latch to pop open. During the last rinse, the rinse aid compartment releases a small amount of rinse aid. If you find any dispenser parts damaged or the dispenser doesn't open when activated during the cycle, you can replace it using the steps in this video. Wear work gloves to protect your hands. Now, let’s get started. Unplug the dishwasher or shut off the house circuit breaker for the dishwasher. To verify that power is disconnected, make sure the control panel doesn’t light up when you press the buttons. Remove the Torx screws from the inner door panel. Support the outer door panel with one hand as you remove the final screws so the outer door panel doesn't fall. Separate the outer door panel and control panel slightly from the inner door panel. Disconnect the user interface control wire harness from the control panel. Pull off the outer door panel and control panel. Unplug the dispenser wire harness from the inner door. Remove the mounting bracket screws and pull off the mounting bracket, letting it hang by the dispenser wire harness. Release the locking tabs and pull the dispenser out from the inside of the dishwasher. Insert the new dispenser and engage the locking tabs. Reinstall the mounting bracket and secure it with the screws. Plug in the dispenser wire harness. Reconnect the user interface control wire harness and attach the outer door panel and control panel to the inner door panel. Reinstall the mounting screws. Reset the house circuit breaker or plug in the dishwasher to restore electrical power.

#############################

New on site