DIY Skateboard Wall Shelf

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=lZR6_tHJlYw

OPEN ME 😏 FINALLY! The skateboard wall shelving tutorial is here for you guys. Don’t forget to comment, like and subscribe if you have not already. Plenty more skateboard DIY’s headed your way and the ones I've already done are linked throughout the video! Happy Wednesday babes xx. • Here is everything you’ll need! Linked as much as I can and no this post is not sponsored. This is what you need for ONE skateboard shelf! You can get these at your local hardware store for MUCH cheaper but I’ve also linked some below if you want to buy it online - you normally have to buy in bulk so it will be more pricey. • 2 corner braces - http://www.osh.com/Osh-Categories/Too... • 2 screws per brace (for one shelf, that’s 4 of these screws - do the math and buy as many as you need) - http://www.albanycountyfasteners.com/... • 2 flat head machine screws with hex nuts - I could not find a specific link but the size I used was 8x32x1 from Orchard Hardware. I definitely would've gotten shorter ones if they had it so I didn't have to do the extra step of cutting the excess off. • Level • Screw driver • Chalk or pencil • Truck Wall Hooks • 2 trucks • Screws to fit within it, use anchors if you need them! • Screwdriver • I sell all my DIY's that are collecting dust since I hate wasting! I post them randomly when I have some that I'm not using or aren't a part of the subscriber DIY series. http://etsy.me/2hmtOao • Connect with me! • i n s t a g r a m // / rachel_metz • f a c e b o o k // / rachelmetzblog • p i n t e r e s t // / rachel_metz • b lo g // https://www.livingtodiy.com • t w i t t e r // rachel_metz • s n a p c h a t // rachel_metz • i n q u i r i e s // [email protected]

#############################

New on site