Youtor
how to Install Led SOLAR GARDEN LIGHTS
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=m1IqYfqA9Us
A quick guide on how to assemble your solar led garden light safely and make sure that you get the best performance from your solar panel, battery and motion sensor. Find out more at...http://www.solarleading.com/product/l... • • So, when you take your light out of the box you are going find four pieces: • A galvanized Aluminum arm or bracket. • The LED and Battery Housing • Clear Plastic Lamp cover; and last but not least: • The solar panel and connector cable • ..there are also going to be some small bolts in the box that you are going to assemble the light. • 1. • So, to assemble the light you are going to have to start by inserting the LED and Battery housing into the aluminum arm from above and fixing it in with the short bolts provided. There's no need to tighten these completely at this stage as we are going to need them a little bit loose to adjust the angle of the solar panel later. • 2. • Next, you can attach the solar panel to the led and battery housing that you have already put into the aluminum arm. Use the longer bolts provided. Again, these can just be finger tight until you have set the angle of the solar panel. • 3. • Now, you can carefully screw on the plastic lamp cover. • 4. • And you can attach the solar panel cable to the led and battery housing. • To do this just push it in firmly and screw the collar clockwise, as shown. • 5. • It's always a good idea to test your light on the ground to make sure you have got it assembled properly. • • So, we've got it fully assembled now and we are ready to mount your light wherever you want it to go -whether that is on a wall or on a lampost or pole. • Just make sure that there aren't any large trees or buildings around that may prevent the sun from getting to the panel at any point in the day. It needs six hours of direct sunlight per day to fully charge the battery. • Also, the light should be installed at least four meters from the ground and at least eight meters from other motion sensor lights, for best performance from the motion sensor. • Last of all adjust the solar panel so that it is facing the midday sun and tighten all of the bolts. • And that's all there is to it! No need for any wiring at all - the solar panel and battery will provide all the power it needs. • So,I hope you found this video useful, if you have any questions or comments, please let us know in the comments below. • You can also click on the links below to see some of our other videos or click on the big red SUBSCRIBE button to see all of our latest videos as soon as they are published. • Thanks for watching, see you next time.
#############################
