Infinity RS 3000 Speakers

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=m3e19dh3oWA

The Infinity RS series of speakers has been designed to provide some of the essential qualities of the higher-priced Infinity speakers in more affordable packages. In 1978, Infinity pioneered the use of polypropylene cones for its woofers because the company found that polypropylene's self-damping properties enabled cones made of it to provide audio reproduction superior to that of paper cones. All current Infinity speakers, including the RS series, use polypropylene woofer cones. The RS3000, next to the top of the RS series, is a two-way system whose 8-inch woofer crosses over at 4.000 Hz to a 1-inch Polycell dome tweeter. The dome of this proprietary Infinity driver, made of polypropylene foam, is said to provide extremely good transient response and a high-frequency limit beyond 22.000 Hz. • The rated frequency response of the RS3000 is 45 to 22,000 Hz ± 3 dB. Its nominal impedance is 6 ohms, and its sensitivity is 89 dB sound-pressure level (SPL) measured at 1 meter. The speaker is recommended for use with amplifiers rated between 20 and 100 watts per channel. The RS3000 woofer operates in a sealed cabinet, which has an attractive oak finish on all surfaces except the rear. The front edges are rounded to reduce diffraction effects and improve imaging. The black grille-cloth frame snaps into plastic sockets that hold it about 1/2 inch away from the speaker board. The cabinet is 20-3/4 inches high, 12 inches wide, and 10-1/4 inches deep. Each speaker weighs approximately 23 pounds. Price: $298 per pair. • http://www.hifi-classic.net/review/in...

#############################

New on site