How To Replace Upper Control Arm 20072014 GMC Sierra 3500HD

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=mfG05LgRQPc

Buy Now! • New Control Arm with Ball Joint Set from 1AAuto.com https://trq.video/ia-1ASFK00141 • New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ib-1ASFU00042 • Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ upper control arm with ball joint in your 2007-2014 GMC Sierra 3500HD. • • Check here for more videos on the 2007 to 2014 GMC Sierra 3500. • GMC Sierra 3500 3rd Generation 2007-14 • This repair was done on a 2007 GMC Sierra 3500 HD and the process should be similar on the following vehicles: • 2007 GMC Sierra 3500 HD • 2008 GMC Sierra 3500 HD • 2009 GMC Sierra 3500 HD • 2010 GMC Sierra 3500 HD • 2011 GMC Sierra 3500 HD • 2012 GMC Sierra 3500 HD • 2013 GMC Sierra 3500 HD • 2014 GMC Sierra 3500 HD • Tools you will need: • • Pry Bar https://trq.video/osw-1AXAA00020 • • 21mm wrench • • 10mm Socket https://trq.video/o2n-1AXAA00017 • • 18mm Socket • • 21mm Socket • • 22mm Socket https://trq.video/oeZ-1AXAA00266 • • Grease Gun • • Pickle Fork • • Needle nose pliers https://trq.video/omg-1AXAA00051 • • Needle nose pliers https://trq.video/omg-1AXAA00052 • • Side Cutters • • Ratchet https://trq.video/oag2-1AXAA00016 • • Torque Wrench https://trq.video/oLf-1AXAA00044 • • Gloves https://trq.video/ojC-1AXSS00048 • • Safety Glasses • • Floor Jack https://trq.video/ovE-1AXAA00068 • • Wheel Chocks • Subscribe: / @trq • Check out our playlist: • GMC Sierra 3500 3rd Generation 2007-14: • GMC Sierra 3500 3rd Generation 2007-14 • ⚠ DISCLAIMER: • While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

#############################

New on site