Burning Arduino 328168 Bootloader with Arduino Mega ATMega1280

>> DOWNLOAD LINK 🎞️ #1 <<

>> DOWNLOAD LINK 🎞️ #2 <<

>> COPY / PASTE LINK PLEASE 🎵 MP3 <<

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=mq5PhM_Fz9Y

I fought and fought and fought with the darn thing until I realized I had it wired incorrectly. • Arduino as ISP relies on the SPI bus to transact the communications. On an older 168/328 the SPI bus is on pins 10 11 12 13. On a Mega(1280/2560) the SPI bus is moved over to the 50 51 52 53 pins! • Thankfully, it's all translated in the ISP Sketch - • Slave reset - destination pin 'reset', connect to source 53 • MOSI - destination pin 11, connect to source 51 • MISO - destination pin 12, connect to source 50 • SCK - destination pin 13, connect to source 52 • write the arduino isp sketch to the Mega, then change the board settings to the target (in my case dumilenove with 328) and com port stays the same. • burn bootloader, and tada! • ArduinoISP Tutorial: • http://arduino.cc/en/Tutorial/Arduino...

#############################