How to Apply Pushin Cushion Loaded Labs

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=mr6fu1nNcwo

For more info: https://loadedboards.com/poron-pushin... • Step 1: Gather Materials • Ungripped board • Loaded Pushin Cushion • Razor blade • Edge grinder • A poker • Step 2: Apply Pushin Cushion • Remove adhesive backing • Press firmly on Pushin Cushion to adhere to your board • Step 3: Trim the Excess • Using a fresh razor blade, lightly graze the Pushin Cushion until your first incision is made • Slowly slice along the rails of your board for an even cut • If adhesive builds up on razor blade, use an up-and-down slicing motion • Step 4: Apply Your Grip Tape • Choose if you want coarse grit or fine grit • Peel adhesive backing and apply to your board • Press firmly to ensure there are no bubbles • Step 5: Grind Your Edges • Using a metal tool, grind the edges of your grip tape against the rails of your board • Finer grit grip tape will take less force • Coarse grip tape will require more force and grinding • Keep grinding until a continuous white silhouette of your board shows through your grip • Step 6: Trim Excess Grip Tape • Using your razor blade, slowly begin cutting off remaining grip tape • Follow the rails of your board for a cleaner cut • Add some relief cuts near kicktails for easer cutting • Step 7: Poke Bolt Holes • Using your poker, stab out the bolt holes • Grind/dig out any excess Pushin Cushion remaining in the holes • Step 8: Removing Your Grip Tape • Using a heat gun or hair dryer, apply heat to the edge of your board for 5-10 seconds • Slowly begin peeling back your grip tape from the edge while continuously applying heat • This same process can be used to remove the Pushin Cushion itself • Pushin Cushion is a 3-mm sheet of PORON® Performance foam with super strong adhesive backing. Apply it directly to your longboard deck (under the griptape) to add a whole new dimension of tactile feedback, vibration damping, and ergonomic contouring. • Vibration damping • More stick and feel under finer grip • Can be built up and layered to create 3D deck features (concave, W, footstops, faux drops, etc.) • Recommended for downhill/freeride and distance/commuting (feels great on carving boards, as well) • Length: 40 / 100 cm • Width: 10 / 25 cm • Thickness: 0.12 / 3 mm

#############################

New on site