DTC Ford U040168 Short Explanation

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=mzAs6LH00wY

The video focuses on the basic Ford specific diagnostic error code. • Contents: • 0:21 Basic DTC analysis according to OBD2 protocol standard. • 1:48 Insight into programming • an explanation of what a bit is and how a byte is formed • decoding the Error Code to the base programming • 2:58 A diagnostically understandable description of the Diagnostic Trouble Code • 3:05 Basic error definition • Possible causes or errors of the car and its parts describing the mentioned error • • We will continue to work on improving the content. • Our efforts at Maxidot s.r.o.the video content gets better. • • #maxidot #dtc #howto #diagnostictroublecode #ford • • • • • Make: • Ford • Code: • U0401 68 • Definition: • Instrument Panel Cluster Voltage Low Input • Description: • DTC P1327 not set,engine started,engine speed over 1,500 rpm,and the PCM received a low voltage message on the Class 2 data line from the Instrument panel cluster (IPC).The IPC detected the system voltage was less than 10.5v for 30 seconds at the IP • Cause: • Check the operation of the Charging system (Generator)The charge indicator and driver warning message are set in the driver information center (DIC)IPC is damaged or has failed • Failure Type: • Event Information • This sub type is used by the control module to indicate the detection of a system event that was not caused by the control module itself but forces the control module to store a DTC (e.g. missing functionality from another system or control module).

#############################

New on site