New Inertial Propulsion Device

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=n2wvM8eRpFc

http://mugugipan.webs.com/ • Masud's idea was to use friction of the track to slow the weight after its initial kick. I thought it would be better to slow it down using electromagnets as well. You could also work out something to slow it down by charging a capacitor via induction etc, thereby recovering some of the expended energy. • I also forgot to mention that the circular track is not necessary in my opinion. You could constrain the weights to circular motion via a central axle as I showed in the spur gear example, so long as you don't try and modify the angular velocity via the axles. • You could also set up a cylinder with two pistons attached, one to each weight, the cylinder must be free to move on the vertical axis. That way you could power the device by compressed air and slow it down by having it re-compress a smaller portion of air. • The Thornson device below. • http://jnaudin.free.fr/html/TIE.htm • You can get an awesome positive can-do attitude to life by visiting https://www.i-awesome.me/

#############################

New on site