Bixler 2 Radio Controlled Sailplane Unboxing and Setup

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=n4GnMuGWN0s

With no instructions in the box, Jim works through what's needed to put this RC plane together and get it going. Much detail is given, so you can use the contents below to pop quickly to the sections that you need to refer to as you use this video for your own set of instructions! • Contents: • 00:00 Bixler2 unboxing • 00:50 Unpacking the box • 03:36 Fastening wings • 07:40 Horizontal stabilizer • 08:05 Vertical stabilizer • 09:00 Optional flaps • 10:34 Gluing tail surfaces • 12:18 Flap cutting • 13:52 Flap control horns • 14:40 Removing wings • 15:05 Postion of flap servo • 15:20 Using servo tester • 16:20 Mounting control horn • 19:00 Fitting flap servo • 19:40 Fitting panel over servo leads • 22:18 Cutting flaps • 23:50 Fitting flap control rods • 25:42 Need for gluing entire panel • 27:25 Gluing panel • 28:45 Issue with flap servos • 30:30 Plan for mixing flap servos • 31:00 Preparing left wing • 42:25 Battery: 3S 2200 mAH • 48:17 Servo harness and extensions • 51:00 Servo tester on flaps • 53:00 Re-installing wings • 59:30 Receiver ESC positions • 1:02:40 Sorting out servos • 1:05:27 Prop components • 1:06:38 Transmitter settings • 1:07:48 Balancing • 1:12:40 Sorting cables • 1:13:40 Locating battery • 1:14:02 Testing Amps • 1:17:00 Maiden flight report

#############################

New on site