Youtor
PulJakassemblyingwhatsinside
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=n69q8ArCLDo
Pul-Jak Fene Stretcher, unboxing and assembly by Steel and Fence Supply, available for purchase from our affiliate partner ecommerce store: • https://fencesupplyco.com/products/pu... • SCRIPT OF VIDEO: • (intro music) • Hi guys, a new shipment of Pul Jaks just came in and I’m going to show you the following: • What’s in the box and how to assemble them. • Here is a box of Pul-Jaks. They are sold individually, however you get a discount when you buy more than one. • Each box has some basic instructions. • Comes with two handles, two heads, and two shafts. The shaft length will vary depending on the model you purchase. • Step 1 take the cotter pin off the handle • Pull the pin out, • Insert the handle in the unit and insert the pin. Align the holes and stick the cotter pin back through the hole. • There is a little bit of play, this is normal – it is how they come. • To release it, undo it here, • Apply the pressure, the spring goes down. Slide down to adjust. Crank to rise. • Again, to readjust, push the pin down and slide the unit. • Now, when using it in the field, come up to the terminal post. Insert your tension bar into your chain link fence, then hook on to the tension bar and align this up to the post. • Crank, Crank, Crank, until it is under tension pressure. • Once you have the tension you wont, this will be under pressure, to release it – use your pliers to tap it here. Another little trick to release the Pul Jak pressure is to hold it in a crank position and then suppress the trigger. Once it is engaged, it will loosen and allow you to pull down. • There you have it, that’s a Pul-Jak Fence Stretcher! • (outro music) • The End.
#############################
