Patch Antenna Design Using Ansys HFSS

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=oUublcJaUYQ

This is to demonstrate the design of a rectangular edge-fed microstrip patch antenna using HFSS @ 2.4GHz. It consists of the design, analysis, simulation tuning of the patch antenna. Enjoy!! • #Kinemarc • #Microstrip_patch_antenna • Here are links to antenna design videos on this channel. • • Design of Ultra-High Frequency (UHF) ... • • DESIGN OF A MONOPOLE (QUARTER WAVE) A... • • DESIGN OF A RECTANGULAR EDGE-FED MIC... • • Design of a Probe Feed Patch Antenna ... • • Design Simulation of a Slot Patch A... • • In HFSS, you need to specify the solution Type of your design. There are four (4) types on solutions as follows; • 1. Driven Modal: This type of solution is for passive high frequency structures such as microstrips, waveguides, and transmission lines. • 2. Driven Terminal: This type also is used for simulations that deals with signal integration for models that have multi-conductor transmission lines. • 3. Eigenmode: Use this type of solution type to calculate resonance of a given structure. Example is a filter. • 4. Transient: This type of solution is used to employ time-domain solutions for designs with pulsed excitation such as ultra-wide band. • Tutor: Awuah Charles Marfo • Email: [email protected] • Contact: 024 865 4432

#############################

New on site