DURALIFT How to Install your Torsion Springs

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=oW2BICJ9sVQ

How to replace garage door torsion springs • Browse our selection of torsion springs here: https://www.duralifthardware.com/tors... • Not sure what size to buy? Watch our guide to selecting torsion springs: • Learn how to safely and efficiently replace or install new garage door torsion springs. Please follow all directions carefully, use proper tools, and take the recommended safety precautions. We recommend hiring a trained professional if you have any doubts about your ability to replace your torsion springs. We are not responsible for any injuries that may result from this process. • Torsion springs should be replaced with springs that are the same size and specifications as the existing ones on the door. Do NOT try to overcompensate using a larger wire gauge or length. Using springs that are the wrong size can be dangerous for both you and your property. • Always begin by releasing the tension on the door and disengaging the opener. The springs will be replaced with the door in the closed position. • Equipment needed: • Pack of 2 Dura-Lift torsion springs • Winding rods • Socket wrench • Drill • Contents: • 0:44 - Step 1: Disengage garage opener • 0:56 - Step 2: Loosen torsion spring with winding rods • 1:41 - Step 3: Unbolt stationary cone from center bracket • 1:55 - Step 4: Loosen cable drums from rod • 2:27 - Step 5: Slide new torsion springs on torsion bar • 2:46 - Step 6: Bolt springs together at center plate • 3:00 - Step 7: Tighten springs to rod (4 quarter turns for every foot of door height, plus 2 turns) • 3:26 - Step 8: Tighten screws on torsion spring and test door tension

#############################

New on site