How to do a Hand Rubbed Sunburst Part 2 NECK

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=pNHDKqxZh8E

In this video, I show you how to do a Hand Rubbed Sunburst for a guitar or ukulele. • Part 1 is me bursting the BODY. • Part 2 I do the burst the neck with the same 3 dyes. • Please Like, Subscribe comment if to help my channel grow so I can bring you wore interesting videos :) • Note- Stew Mac rebrand the Transtint dyes- they are exactly the same product. Two main burst colours have different names but I list both names. (I called Transtint to check all this). • Colortone Liquid stains used are: • 1- Tobacco Brown (Perimeter color) • StewMac product number # 5034 - https://stewmac.sjv.io/2r6yMM • (Transtint name is Mission Brown.) • 2- Medium Brown (For blending the other two main tones). • StewMac product number # 5033- https://stewmac.sjv.io/2r6yMM • 3- Vintage Amber (Center color).- • StewMac product number # 5030 - https://stewmac.sjv.io/2r6yMM • (TransTint name is Honey Amber ) • • *Useful Additional colors • 4- Red Mahogany • (The transition color (instead of medium brown), for a more red burst) • StewMac product number # 5032- https://stewmac.sjv.io/2r6yMM • 5- Black • Great color to have for giving a burst an extra dark edge (Mix a small amount of black in with the usual tobacco brown mix, in a separate container) • StewMac product number # 5040- https://stewmac.sjv.io/2r6yMM • Diluted (sometimes) with Denatured alcohol but water can also be used with these dyes. Water raises the grain more/faster so if you are going to use water, wipe all surfaces with clean water, let dry, then sand of the raised grain...you will have to do that at least 2-3 times. • I use a separate piece of old cotton • T shirt for each color. • Wear gloves and a respirator. • 1- I grain fill everything ***first* (the grain fill must be as dark as your darkest dye color). • 2- Sand it all flat to 220, • 3- Then add the burst colors. • 4- If you're spraying nitro, you MUST spray a few dry dust coats to seal this colour otherwise it will separate/mottle a bit (and also bleed onto any white purflings you may have) a bit and you have to start again.- So DRY coats to seal, then wet spray. • Body wood is Tasmanian Blackwood (Acacia melanoxylon) grain filled with Cardinal grain filler and finish sanded to 220. After rubbing the burst, spray a dry coat of sealer to minimize the possibility of the color running, then spray a wet coat, let dry then proceed with your normal spraying schedule- don't sand through during cut back or its back to square one = :( • • https://www.beauhannamguitars.com • This video is NOT sponsored. Some product links are affiliate links which means if you buy something, Beau will receive a small commission at no additional cost to you. • #BeauHannam #Sunburst #handrubbedsunburst

#############################

New on site