Making Inlay Sign

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=pPJ4IwPYbyk

What do you think of how this turned out? • Check out the plans for this project - https://www.toolstoday.com/be-thankfu... • Carving texture on the Stepcraft M.1000 CNC machine using the Amana Tool item 46426-K 1/8 radius ball nose bit • - - - - - - • RPM: 18,000 • Feed Rate: 180ipm • Plunge Rate: 90ipm • Depth per pass: .25 • Cutting the pockets for the letters of the be thankful sign for a perfect fit on the Stepcraft M.1000 CNC machine starting with the Amana Tool 46202-K 1/4 Spektra™ coated downcut bit, all linked below to clear the majority of the waste. • - - - - - - • #TeamTOOLSTODAY • - - - - - - • RPM: 18,000 • Feed Rate: 100ipm • Plunge Rate: 50ipm • Depth per pass: .25 • - - - - - - • I then switched out for the 46200-K 1/8 Spektra™ coated downcut bit to clean up the edges and make sure I had the correct radius on the inside pocket. • - - - - - - • RPM: 18,000 • Feed Rate: 60ipm • Plunge Rate: 30ipm • Depth per pass: .25 • #short #shorts • Tools Used: • Vectric Software for CNC https://www.toolstoday.com/everything... • STEPCRAFT M.1000 36 x 48” CNC Machine https://www.toolstoday.com/stepcraft-... • Amana Tool 46426-K SC Spektra Extreme Tool Life Coated Up-Cut Spiral Ball Nose 1/8 R x 1/4 D x 1/2 CH x 1/4 SHK x 2-1/2 Inch Long x 2 Flute Router Bit with High Mirror Finish • https://www.toolstoday.com/v-14621-46... • Amana Tool 46202-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 3/4 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit • https://www.toolstoday.com/v-13779-46... • Amana Tool 46200-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/8 Dia x 1/2 CH x 1/4 SHK 2 Inch Long Down-Cut Router Bit • https://www.toolstoday.com/v-13777-46... • ** Subscribe - / toolstoday • ** Shop the website - http://www.toolstoday.com

#############################

New on site