Youtor
T2 Buckeye Depron Foam RC Plane DIY
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=pY8GL1XPr_E
I already put an eye on this beauty, the T-2 Buckeye for quite sometime and now this time I share my build. This time I just want to make my dream jet, not to bother to simplify the shape, no detachable wing, no easy build, I just want to have her and fly it. I'm not expecting you to build this like any my other models, but if you want to this is a good flyer. My plan was to equipped this RC model jet with mechanical retractable landing gear or servo driven. But in a test, both had problem on the servo, I use plastic gear servo, maybe I should use metal gear servo. Finally I replace the main landing gear with servoless retract and problem is gone. Like usual I use pusher prop with NTM 2830 1000kv 370 watts motor, the same motor I use for Boeing 737-300. I also use the same prop 8x6x4 but with 4S battery. The prop specification is above recommendation but with 370 watt and soft blade I think it can manage. She can short take off and shoot the sky like on a rail. The landing is also easy, I am happy with the result. • SUBSCRIBE and Like to support this channel • #t2buckeye #jettrainer #buildvideo • DONATE : Paypal [email protected] • You can download the plans on the link below : • A4 Plans : https://paper-replika.com/RCplans/PR_... • A0 Plans : https://paper-replika.com/RCplans/PR_... • A3 Decal : https://paper-replika.com/RCplans/US_... • A4 Decal : https://paper-replika.com/RCplans/US_... • Build instructions : • https://paper-replika.com/index.php/r... • DONATE via Paypal : [email protected] • Playlist : • 02:38 Plans Preparation • 04:51 Landing Gear • 09:05 Wing • 07:32 Covering the Fuselage • 10:36 Wing • 15:30 Wingtip • 16:39 Fuselage • 28:58 Covering • 32:48 Canopy • 35:10 Paint and Decals • 37:36 Accessories • 39:14 Electronics • 42:28 Maiden Flight • 47:49 Review (Next Project?) • Specs : • 1. Wingspan 1300 mm • 2. Flying weight : 1400 grams/ 49.4 oz • 3. Wing loading : 42.4 g/dm2 - 13.9 oz/sq.ft • 4. Wing cube loading : 7.4 • 5. Wing Area : 33 dm2 / 512 sq.in • 6. CG : 7.5 cm from LE (see wing plans) • Electronics • NTM 28-30 1000kv 370 watt • Propeller : 8x6x4 • ESC 50A • Battery Lipo 4S 2200mah • 4 plastic gear 9 gram servos • 3 metal gear servo • mechanical retract / servoless retract • Materials : • 1. 3 mm Depron/ Polyfoam • 2. 5 mm Depron/ Polyfoam • 3. 7 mm + 3 mm Plywood • 4. Hot glue, CA glue, PVA glue, Epoxy Glue • 5. 3 mm bicycle wheel spoke wire • 6. 1.5 mm wire • 7. white packing tape / wax paper • 8. chopsticks, toothpick • 9. 10 mm EVA foam (black) • 10. 0.3 mm Mica plastic • 11. Plastic tray • Tools : • 1. Covering iron https://amzn.to/38YZyMh • 2. Heat gun https://amzn.to/3A1cvkR • 3. Hot glue gun https://amzn.to/38XyrkY
#############################
