commercial metal roofing standing seam Mississippi 601 212 5433

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=qVb2LdoTO9U

601 212 5433 https:metal-roofing-contractors.com • / watchv=kkkwnrjvvd0 list=pl34ss60xg-s5z0yfj... • 1. DESIGN INTEGRITY • CMS begins and ends in the high, reducing the risk of leakage at the rake that can occur when • finishing in the low. The panel seam is sealed with a factory-applied hot-melt mastic, a superior grade to mastics • applied in the field. • 2. FLOATING ROOF • The roof was designed to cope with the forces of expansion and contraction. This is accomplished • by allowing the panels to freely move up and down the roof slope. Due to this design feature, the system offers no • diaphragm capabilities or purlin stability. • 3. CLIP SELECTION • A large selection of clips is available for various types of construction. • 4. UL CLASS 90 RATING • CSMI’s roof system has 10 different UL Class 90 construction numbers, each of which is available • with several options. • 5. FIRE RESISTANCE RATINGS • The roof system qualifies for use in several UL design assemblies and carries a UL “Class A” fire rating. • 6. SIMPLICITY • No field seaming is required. The panels simply snap together forming a self-locking seal. • 7. FLEXIBILITY • CMS roof system offers welcome flexibility to the erector. Wall covering can be erected before or • after the roof is installed. Panel installation is an uninterrupted procedure. • 8. EASE OF INSTALLATION • The erector has the option to install each side of the roof separately or both sides simultaneously, which greatly • increases the speed and convenience of erection. Being reversible end-for-end, sheets do not have to be special • ordered for each side of the building. No field notching of panels at endlaps or ridge is required. • 9. FORGIVING SYSTEM • The system design allows for the roof to be finished in the “high” when an out-of-square condition or • other factors cause the roof to terminate up to 4” from the steel line. • 10. BUILDING LENGTH • Odd, as well as even, footage buildings can be terminated at a major rib with the use of our 12” and 18” panel or at • other odd widths by field bending the panel. • 11. PREPUNCHED PANELS AND COMPONENTS • CSMI’s prepunched system, combined with self-engaging back-up plates, assures panel module and speeds roof • installation. • 12. DURABILITY • Every unpainted panel is manufactured from galvalume .. • COLOR AND FINISHES • is available in a wide variety of popular colors in two different paint systems. Please contact CMS • for color availability and lead times.

#############################

New on site