How To Replace an Anode Rod

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=qhoE0b8dHKs

To install... • 1 Turn off water and fuel supply (gas or electricity) to water heater. • 2 Partially drain the water heater around 6 inches to give you access but keep weight in the tank. • 3 Locate the anode rod on the water heater; if necessary, unscrew and lift off the cover from the top of the heater. • 4 Use a ratchet wrench and 1 1/16-inch deep socket to unscrew the anode rod from the heater. If it is the nipple type, you will need an adjustable wrench. • 5 If the anode rod won't budge, slip a steel pipe onto ratchet wrench handle for extra leverage. • 6 Lift out and discard the old anode rod. • 7 Wrap Teflon tape around threads of new anode rod; insert anode rod into water heater and tighten with 1 1/16-inch socket. • 9 Turn the water and fuel supply to the water heater back on. • ---------------------------------------------------------------------------------------------------------------------------------------------- • Shop for Anode rods here: https://www.supplyhouse.com/Anode-Rods • Shop at Supplyhouse.com: https://www.supplyhouse.com/ • Email us: • [email protected] • Follow Supplyhouse.com! • Facebook: / supplyhouse • Instagram: / supplyhouse • Twitter: / supplyhouse_com

#############################

New on site