Youtor
P0340 Nissan P0345 Stalling and Cutting Out quotFixedquot
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=qiJFV-6SVRU
P0340 and p0345 are for cam positioning sensor sensor bank 1 and bank 2. I'm working on a Nissan Murano and the customer was complaining of a stalling or hesitation while driving and cutting out. • Got vehicle in and hooked lab scope up to cam sensor to monitor cam sensor circuit and look at cam sensor signal. Time cam sensor signal good but found a loose connection at cam position sensor causing the stalling problem. • Vehicle Application: • 2003 FX35 3.5 • 2004 FX35 3.5 • 2003 G35 3.5 • 2004 G35 3.5 • 2005 G35 3.5 • 2006 G35 3.5 • 2006 M35 3.5 • 2005 350Z 3.5 • 2006 350Z 3.5 • 2003 Altima 3.5 • 2003 Maxima 3.5 • 2004 Maxima 3.5 • 2005 Maxima 3.5 • 2006 Maxima 3.5 • 2007 Maxima 3.5 • 2003 Murano 3.5 • 2004 Murano 3.5 • 2005 Murano 3.5 • 2006 Murano 3.5 • 2007 Murano 3.5 • Customer Concern: Has a check engine light on and a Camshaft Position (CMP) sensor code P0340. • Average Reported Mileage: 118081 • Tests/Procedures: 1. Monitor the signal on the CMP sensor with a lab scope. The sensor should produce a 0-10 volt square wave pattern. This type of sensor produces the signal and pulses it out, it is not a sensor that pulses a reference voltage on and off to ground. If the sensor is not producing a signal, it may be faulty or may have no power or ground. • 2. Also check for poor pin fit and poor connection at the sensor connector. • Author: • Diagnostic Codes • P0340 • P0345 • • Check out The Flat Rate Mechanics Tool Store on Amazon https://goo.gl/M8MpdC • Subscribe to my youtube channel here: https://goo.gl/j1pCfn • Connect with me: • FaceBook: https://goo.gl/rKg2Bv • Grease Monkey Art Gallery https://greasemonkeygallery.com/ by The Flat Rate Mechanic • Instagram: https://goo.gl/NCjRhM • Google Plus: https://goo.gl/6AyJz3 • Website: https://flatratemechanic.com • For Promotional offers, consulting, training, sponsorships or other inquiries contact me at [email protected] • The Flat Rate Mechanic. 26 year ASE Master Automotive Technician and Advanced level ASE certified here to help you save money on your automotive repairs • The Flat Rate Mechanic is a participant in the Amazon Influencer Program. nbsp; • nbsp: • Disclaimer: • Due to factors beyond the control of The Flat Rate Mechanic, it cannot guarantee against unauthorized modifications of this information or improper use of this information. The Flat Rate Mechanic assumes no liability for property damage or injury incurred as a result of any of the information contained in this automotive repair video. The Flat Rate Mechanic recommends safe practices when working on cars or trucks with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this repair video. Due to factors beyond the control of The Flat Rate Mechanic, no information contained in this automotive repair video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.
#############################
