Youtor
Fusion 360 Tutorial for Absolute Beginners 2020
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=qvrHuaHhqHI
Join our updated Fusion Masterclass 👉 https://bit.ly/PDOMasterclass • Learn Fusion 360, without any prior experience, with this free mini-course for absolute beginners! Unlike most Fusion 360 beginner tutorials, this tutorial features the brand new UI and is up to date with the 2020 Fusion 360. • By the end of this tutorial, you'll have created your very own customizable and 3D-printable stamp in Fusion 360. • Here are 5 tips for Fusion 360 Beginners: • 1. Save your file right away! • 2. Create new components for each part • 3. Keep sketches as simple as possible • 4. Use construction lines • 5. Be creative - try things out...you can always hit undo! • *Support our free tutorials* • PayPal - https://paypal.com/paypalme/productde... • Patreon - / productdesignonline • Say Thanks w/Coffee - https://buymeacoffee.com/pdo • *Tutorial Resources* • 1. Resource page - https://ProductDesignOnline.com/16 • 2. Checklist for F360 beginners: http://bit.ly/f360checklist • *Top Fusion 360 Playlists* • 30 Days Series (latest) - https://bit.ly/30DaysV2 • Woodworkers - http://bit.ly/woodworker-playlist • 3D Printing - http://bit.ly/3D-printing-playlist • Sculpting - http://bit.ly/sculpt-playlist • Products I recommend (some are affiliate links to support the channel!): • *3D Printing* • Bambu X1C - https://bit.ly/BambuX1C • Bambu AMS - https://bit.ly/BambuAMS • Bambu P1S - https://bit.ly/BambuP1S • Bambu A1 Mini - https://bit.ly/BambuA1Min • Bambu Filament - https://bit.ly/BambuPla • • Product Design Online links: • ━━━━━━━━━━━━━ • PDO Website: https://productdesignonline.com • PDO Academy: https://bit.ly/PDOAcademy • Fusion beginners PDF: http://bit.ly/f360checklist • Fusion hotkeys PDF: https://bit.ly/F360Hotkeys • 0:00 - Fusion 360 for Absolute Beginners • 1:30 - Creating a new project folder • 3:00 - Creating a new component • 5:16 - Sketching the reusable stamp plate • 8:01 - Extruding the reusable stamp plate • 9:49 - Inserting your custom SVG logo • 13:37 - Creating the handle component • 16:50 - Projecting the base of the handle • 19:07 - Creating the offset (tolerance) • 21:30 - Extruding the handle part • 23:09 - Creating the top of the handle • 26:37 - Adding fillets to the handle • 28:37 - Exporting for 3D printing • — • Disclaimer: • This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you. • #Fusion360 #ProductDesignOnline #3dprinting
#############################
