Youtor
Honda Fourtrax 300 Repair TRX300
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=r6FSAk3kA5s
Honda Fourtrax 300 Repair TRX300 • This post covers Honda Fourtrax 300 Repair TRX300. Here we troubleshoot the Honda Fourtrax 300 engine and repair it. We also explain how I used multimeter to aid in the troubleshooting process. • The Troubleshooting Process • The first thing I try to do on a simple motor like on the Honda Fourtrax is to break it down to either an electrical issue or a fuel issue. • The easiest way that I have found to do this is to remove the spark plug and then try and start the engine. If you hold the sparkplug up to the frame of the Honda and try starting it, you should see spark. If you do, you likely have a fuel issue. If you do not, you likely have an electrical issue. • Fuel Issues • At the same time as you are turning the engine with the spark plug out, give a smell and see if you are getting a gas smell out of the spark plug hole. If you smell gas, that means your fuel line is not clogged. If you do have spark and you smell fuel, then the fuel mixture could be off. At this point you need to do a deeper dive into the carburetor and adjust according to the manual or do a carburetor rebuild. That is not the problem with my Honda today, so we will save carburetor issues for another day. • No Spark • The issue with my Honda is no spark. There are several things we can check out, but everything is under the gas tank, so we will need to remove that. It is removed by simply unscrewing one bold underneath the seat and removing the fuel line. Make sure the tank fuel switch is set to the off position. • Tank Off • I removed my tank and immediately saw the likely cause of my issues. There was a great big wad of pink insulation in my wiring harness. A mouse had decided to make a nest under my gas tank which is on top of my coil and wiring harness. Now I have to hope that the little critter didn’t chew through the wiring harness, as that would be a big old pain to repair. • Nest Removed • I removed the nest and inspected the wiring harness. He did chew through the outer insulation of the wiring harness, but did not chew through any wires. That is good, but I still have some kind of electrical issue. • More in the video.... • Check out the blog post at: http://greatescapefarms.com/honda-fou... • Want to Help Out a Small Business?? • If you are local you can support our small business by buying plants at https://greatescapefarms.com/plants-f.... You can also help us by shopping on Amazon just by going through our storefront! As an Amazon Associate, I earn commission from qualifying purchases. There is no additional cost to you! Our storefront at Amazon is located at this link: https://www.amazon.com/shop/greatesca.... Buying from either location helps our business produce more content for you. • If you like this blog post and want to find out more about Great Escape Farms check out our Great Escape Farms Overview https://greatescapefarms.com/great-es.... Here you get an overview of all the wonderful stuff we are involved in. Also, sign up for our email list at the bottom of the linked page. • Great Escape Farms is now on Patreon! You can support us for as little as $1. If you enjoy our work and want to help support us, please check out our Patreon page at: / gef . • Auto Subscribe link • / @greatescapefarms • #honda #fourtrax #howtorepair
#############################
