PCB a Doble Cara con CNC amp FlatCAM Tutorial Completo

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=rDLayMgCDao

In this tutorial we cover some of the main techniques for manufacturing double-sided PCBs using inexpensive CNC machines with the help of FlatCAM and Candle. • 00:00 Introduction • 01:00 G-Code Programs (Top Copper) • 09:53 Drill calibration and preparation • 12:45 Height Map • 14:25 Top Copper • 18:03 G-Code Programs (Bottom Copper) • 26:12 Board rotation and alignment • 30:52 Bottom Copper • 34:37 Finishing touch and results • You can find the parameters and resources mentioned in the video in the following link: • http://gomezgimenez.com/electronica/2... • The software to perform the alignment of the bottom face can be found in the following links: • Project page and instructions: • https://github.com/alvarogimenez/g-co... • Installation and executables: • https://github.com/alvarogimenez/g-co... • FlatCAM Version: 8.994 • https://bitbucket.org/jpcgt/flatcam/d... • Candle Version: 1.1.7 • https://github.com/Denvi/Candle/relea... • Tools and accessories: • Drill Bits PCB: https://www.amazon.es/dp/B073P4PQLZ • PCB Copper: https://www.amazon.es/dp/B07RBK9WW6 • CNC 1610: https://es.aliexpress.com/item/100500... • PCB Drill Bit 0.1mm x 20º: https://es.aliexpress.com/item/400096... • Music by Ketsa

#############################

New on site