Youtor
Make a DIY Motorcycle DYNO with ARDyno Part 1 Js Garage
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=rLmr0hmZeaY
It is finally time to build my ARDyno! I have been waiting for a while waiting for the right bits and pieces. • https://ardyno.weebly.com/ - Get an ARDyno board for yourself • / @2strokestuffing - 2strokestuffing • http://s.click.aliexpress.com/e/l6gAbjy4 - Uno R3 • http://s.click.aliexpress.com/e/cvQXKJwY - NPN Hall sensor • http://s.click.aliexpress.com/e/dyr4c3iC - Inductive Clamp • Well after owning this board for longer than I would like to admit I have finally got the bare bones of a dyno setup... • ARDyno just requires a big roller, this one is about 300lbs for just the roller itself. Then you need a RPM input signal from the roller and also an RPM input from the engine you are running. • Bonus at the end of a quick run up of the RC-One Typhoon 2 stroke. • Some of the tools I use: • Vevor Case splitter/ Crank Puller Combo: • https://s.click.aliexpress.com/e/_DdO... • Multi Piece Flywheel Puller: • https://s.click.aliexpress.com/e/_DDW... • Piston TDC/Ignition Measuring tool: • https://s.click.aliexpress.com/e/_DkB... • Pressure Tester • https://s.click.aliexpress.com/e/_Dmb... • Roller Weight Scale • https://s.click.aliexpress.com/e/_Dlj... • Dial Indicator with Magnetic Base • https://s.click.aliexpress.com/e/_Dks... • Crimp Tool for Motorcycle/Automotive Plugs • https://s.click.aliexpress.com/e/_Dnc... • Fluke Multimeter • https://s.click.aliexpress.com/e/_Dkd...
#############################
