Durafly GOBLIN Maiden Flight

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=rZ7om2ZQOTY

Get one here at HobbyKing!: Blue: https://bit.ly/2YRALps Yellow: https://bit.ly/2NK0I3M • Or on Amazon: https://amzn.to/3guw8rK • Radio I use: https://amzn.to/2ykFXUF • Battery I use: https://bit.ly/2YnDk0Q • Camera used: https://amzn.to/2GQCW2H • My Amazon store: https://www.amazon.com/shop/johnvhrc • Amazon links are affiliate links, free for you to use, but give me a tiny commission off the sale, to help fund my channel! Thank you! • Thanks GBLynden for recording my flights! Check out his YT channel! • Link to manual:https://cdn-global-hk.hobbyking.com/m... • NOTE*please check before you take your first flight • '1) At the top of the fuselage, check that the gap between the spinner backplate and the fuselage is approx 4mm . If it is not, you will need to add a washer behind the top '+' motor mount. This is to ensure the correct amount of down thrust. See the reference attached here. • 2) It is recommended to reinforce the elevator hinge line with tape. • 3) balance the prop (and ideally spinner) before flying • 4) Check that the motor mounting screws are tight.' • 5) replace the ball links for the supplied clevises • 6) confirm the model is correctly balanced on the CG.

#############################

New on site