Youtor
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=rkUv6kSJlok
CCNA Packet Tracer 2.4.1.2 Skills Challenge tutorial. Step-by-step solution and workflow. #rockforestlabs • Packet Tracer - Skills Integration Challenge • VLAN 1 • 128.107.20.10 • 255.255.255.0 • VLAN 1 • 128.107.20.15 • 255.255.255.0 • Student-1 • NIC • 128.107.20.25 • 255.255.255.0 • Student-2 • NIC • 128.107.20.30 • 255.255.255.0 • Objectives • · Configure hostnames and IP addresses on two Cisco Internetwork Operating System (IOS) switches using the command-line interface (CLI). • · Use Cisco IOS commands to specify or limit access to the device configurations. • · Use IOS commands to save the running configuration. • · Configure two host devices with IP addresses. • · Verify connectivity between the two PC end devices. • Scenario • As a recently hired LAN technician, your network manager has asked you to demonstrate your ability to configure a small LAN. Your tasks include configuring initial settings on two switches using the Cisco IOS and configuring IP address parameters on host devices to provide end-to-end connectivity. You are to use two switches and two hosts/PCs on a cabled and powered network. • Requirements • · Use a console connection to access each switch. • · Name Class-A and Class-B switches. • · Use the 8ubRu password for all lines. • · Use the C9WrE secret password. • · Encrypt all clear text passwords. • · Include the word warning in the message-of-the-day (MOTD) Banner. • · Configure addressing for all devices according to the Addressing Table. • · Save your configurations. • · Verify connectivity between all devices. • Note: Click Check Results to see your progress. Click Reset Activity to generate a new set of requirements. If you click on this before you complete the activity, all configurations will be lost. • https://goo.gl/veHBnY
#############################
