How to Change Oil in a Pressure Washer

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=sG2TDtKGLhQ

Hello. In this video I'm changing the oil in my Honda GX200 with Castrol 10W-30. First, I placed 2 x4 boards under the metal plate. Using a drain pan underneath to catch the old oil and recycle it is smart. A 10mm wrench will release the bolt. It'll be pretty black as it drains. I took out the dip stick to help it breath. Once it stops dripping, put the plug back in. There are plugs on both sides so that you can put the dip stick on either side. Depending on whichever is easier to service. I use a transmission dip stick to check the oil level. It usually takes about 3/4 of a quart to fill it. Make sure the pressure washer is level to get a good reading. It's important not to fill it too full. Easy to do. • Follow us here! • SCOTTYS MOBILE DETAILING WEBSITE • http://scottysmobiledetailing.com/ • Main YouTube Channel • SCOTTYS DETAILING • / scottysdetailing • 2nd Youtube vlog channel • THE SMD STUDIOS • / thesmdstudio • SCOTTYS @ LINKEDIN • https://www.linkedin.com/ • SCOTTYS @ FACEBOOK • http://www.facebook.com/ • SCOTTYS @ TWITTER • http://twitter.com/ • • SCOTTYS @ PINTEREST • / scottysdetail • ERIC THE CAR GUY • / ericthecarguy • SCANNER DANNER • / scannerdanner • MIGHY CAR MODS • http://www.youtube.com/user/mightycar... • SWRNC HARD WORKER • http://www.youtube.com/user/swrnc?fea...

#############################

New on site

How To Change The Oil In A Pressasher