How to install Windows on M2 NVME drive

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=skbrk6Ox6E4

How to install Windows on M.2 NVME drive? // Hello friends, in this video I'm going to share with you a few tips and tricks on how to get Windows installed on your brand new NVME SSD drive. Before you can do it, you need to follow a few easy steps and it will work with no problem. • The first step, make sure to unplug all other SATA or IDE drives such as HDD, SSD, or Optical drives. This first step might help right away. If it didn't work, go to step 2. • In the second step, turn CSM (Compatibility Support Module) mode off in BIOS in Advanced Settings in Boot Section. This will allow BIOS to work with new memory even if the correct drivers are missing. This usually happens when trying to install the newest NVMe drive on an older motherboard supporting M.2 NMVe. • The third step, change the SecureBoot option to Other OS in BIOS in Advanced Settings in Boot Section. • Hope this video will help you solve those issues with a brand new M.2 SSD not showing up during the Windows installation process or even in BIOS. • If you would like to see the comparison between M.2 NVMe, SATA SSD, and regular HDD check it out here: • NVMe SSD vs SATA SSD vs 5400 rpm HDD ... • ADATA XPG SX8200 Pro unboxing and installation: • HOW FAST IS ADATA XPG SX8200 PRO M.2 ... • Computer doesn't detect all the installed RAM? • RAM NOT DETECTED BY YOUR COMPUTER??? ... • How to fully clean your PC? • FULL PC CLEANING CABLE MANAGEMENT • Other interesting videos and hardware reviews: • HARDWARE • Enjoy! • #PulsarTECH #ADATA #SX8200

#############################

New on site