Replacing Brushless Motor Bearings Without A Press

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=sta20qCthR0

Here is how I change my brushless motor bearings using a bolt and some washers. The end result is perfectly installed bearings just like you would have if you used an expensive press. • When choosing a bolt, make sure you get a metric bolt that is the same thickness as your motor shaft. For example my shaft was 3mm thick so the bolt I used was a M3 metric bolt. The length of the bolt will depend on your motor. For most 2204 to 2206 motors the length will be either a M3x30mm or M3x35mm bolt. • Some websites I use to purchase bearings • RMRC - https://www.readymaderc.com/store/ind... • GetFPV - http://www.getfpv.com/motors/accessor... • Banggood - (Emax bearings but you can search for what size you need) - http://www.banggood.com/Emax-Bearing-... • Random tips playlist - • Random Multi-rotor Tips Playlist • All my playlists - / @projectbluefalcon • Video editor - http://amzn.to/2n7sUiF • My personal vlog channel - / jcofficial3

#############################

New on site