How to Hardwire a Dash Cam A StepbyStep Guide Hikvision dashcam

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=tDw9D0sCOOc

1. Find your car’s fuse box, usually inside the car or in the engine bay. Remove the cover to access the fuse slots. • 2. Prepare to install equipment. • 3. Find the Correct Fuse Slot, some slots only provide power when the ignition is on. • 4. The Constant fuse provides power to the dash cam even when the ignition is off. • 5. The ignition-controlled fuse only powers the dash cam when the ignition is on. • 6. Pull out the fuse. Pull out the fuse. • 7. Connect the Red wire (ACC). • 8. Connect the Yellow wire (Constant power). • 9. Connect the Black wire (Ground). • 10. Suitable for all series of Hikvision dashcam. • • 📌 Don’t forget to like, comment, and subscribe for more tech reviews and road safety tips! • —————————————————— • 👉FOLLOW US: • Twitter: • https://x.com/HikDashcam • TikTok: • / hikvisiondashcam • #Dashcam #Hikvision #Hardwire #CarSafety #DrivingTech

#############################

New on site