Youtor
DIY Mini Keg System for Homebrew with Force Carbonation
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=tSIhR4tWos4
Step-by-step directions on how to make a mini keg system for home brew. • More homebrew tutorials: https://homebrewtutorials.com/ • The system is not longer for sale as I mentioned in the video... Sorry, but here is a list of items to help you build your own! • As an Amazon Associate I earn from qualifying purchases. • Mini Keg - (Paid Link) https://amzn.to/3a5Qp2x • Dual Gauge CO2 Draft Beer Regulator - (Paid Link) https://amzn.to/2TryuOD • 2 ft 1/4 inch copper tube - (Paid Link) https://amzn.to/3cUlhW3 • List of items: • • (2) ¼ inch Nipples - (Paid Link) https://amzn.to/2M1Lerb • • Rubber Bung - (Paid Link) https://amzn.to/36kmbZD • • ¼ inch Copper Tubing – 2 feet - (Paid Link) https://amzn.to/3cUlhW3 • • 3/8 X ¼ Brass Compression Adapter - (Paid Link) https://amzn.to/36nj7Ms • • ¼ inch Male X 3/8 inch Hose Barb - (Paid Link) https://amzn.to/3cWLXFU • Optional • • Easy turn hose clamp for 3/8 inch tubing • • Easy turn hose clamp for ¼ inch tubing • • ¼ inch Party Tap - (Paid Link) https://amzn.to/2LLnU0u • • ¼ inch Keg line tubing – 4 feet • • 3/8 inch Keg line tubing – 4 feet • First scene shows the Mini Keg System all set up and how it works. • 1. Co2 goes through the regulator and into the Hose Barb. • 2. From the Hose Barb the co2 goes into the Threaded Tee. • 3. Co2 inside the threaded Tee will try to leave out both sides but the compression adapter will stop it from going up and force it down into the keg. • 4. With no where else to go the Co2 travels down the threaded Tee through the Nipple, around the copper tubing and into the keg. • 5. The Gray Rubber bung creates a seal at the top of the keg. • 6. Once the Co2 is inside the keg the air tight seal produced with the compression adapter will trap the Co2 inside the keg causing force carbonation. • 7. Inside the Compression adapter is a ¼ inch copper tube which runs down the nipple, through the threaded tee, through the other nipple and to the bottom of the keg. • 8. At the top of the system the end of the copper tube sticks out through the Compression Adapter where ¼ inch Keg Line tubing is connected. Using a Hose clamp that creates an air tight seal. • 9. On the other end of the ¼ inch keg line tubing is a Party Tap also with a hose clamp. • 10. The whole system is air tight which causes pressure to build inside the keg. Once the pressure is released by opening the party tap the beer will flow freely. • Second scene shows an aerial shot of the items on a white sheet of paper with pieces of paper showing the name of each individual piece. • List of items: • • (2) ¼ inch Nipples • • Rubber Bung • • ¼ inch Copper Tubing – 2 feet • • 3/8 X ¼ Brass Compression Adapter • • ¼ inch Male X 3/8 inch Hose Barb • • • Easy turn hose clamp for 3/8 inch tubing • • Easy turn hose clamp for ¼ inch tubing • • ¼ inch Party Tap • • ¼ inch Keg line tubing – 4 feet • • 3/8 inch Keg line tubing – 4 feet • • As an Amazon Associate I earn from qualifying purchases.
#############################
