Youtor
Dozer CAT D9R
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=tf0JpTd68t8
ENGINE • Engine Model Cat® 3408C • Flywheel Power 302 kW • Bore 137 mm • Stroke 152 mm • Displacement 18 l • Net Power - SAE J1349/ISO 9249 302 kW • Engine Power - Net Power - SAE J1349/ISO 9249 302 kW • Engine Power - Gross Power - SAE J1995* 330 kW • Note (1) Capable of meeting U.S. EPA Tier 1 Equivalent. • Note (2) Engine ratings apply at 1,900 rpm. • Note (4) No derating required up to 2286 m (7,500 ft) altitude. • Engine Power - EU 80/1269 302 kW • Note (3) Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator. • Note * Excludes all fan losses. • Emissions Optional U.S. EPA Tier 1 Equivalent • WEIGHTS • Operating Weight 48784 kg • Shipping Weight 36154 kg • Note (2) Shipping Weight: Includes clutch/brake arrangement, lubricants, coolant, 20% fuel and ROPS, FOPS cab and 610 mm (24 in) extreme service shoes. • Note (1) Operating Weight: Includes clutch/brake arrangement, lubricant, coolant, 100% fuel, hydraulic controls and fluids, 610 mm (24 in) extreme service shoes, SU-Blade, single-shank ripper, ROPS, FOPS cab and operator. • TRANSMISSION • 1 Forward 3.9 km/h • 2 Forward 6.8 km/h • 3 Forward 11.9 km/h • 1 Reverse 4.7 km/h • 2 Reverse 8.4 km/h • 3 Reverse 14.7 km/h • 3 Forward - Drawbar Pull 218000 N • 2 Forward - Drawbar Pull 400000 N • 1 Forward - Drawbar Pull 725000 N • HYDRAULIC CONTROLS • Pump Type Piston-type geared from flywheel • Pump Output - Implement 239 l/min • Tilt Cylinder Flow - Rod End Flow 137 l/min • Tilt Cylinder Flow - Head End Flow 167 l/min • Bulldozer Relief Valve Setting 26200 kPa • Tilt Cylinder Relief Valve Setting 19300 kPa • Ripper - Lift - Relief Valve Setting 26200 kPa • Ripper - Pitch - Relief Valve Setting 26200 kPa • Note (1) Implement Pump output measured at 1,900 rpm and 6895 kPa (1,000 psi). • Note (2) Complete system consists of pump, tank with filter, valves, lines, linkage and control levers. • UNDERCARRIAGE • Shoe Type Extreme Service • Width - Shoe 610 mm • Shoes/Side 43 • Pitch 240 mm • Ground Clearance 596 mm • Track Gauge 2250 mm • Length - Track on Ground 3470 mm • Ground Contact Area 4.24 m² • Track Rollers/Side 8 • Total Operating Weight** - With Blade and Single-Shank Ripper 48784 kg • Width - Over End Bits 4310 mm • Digging Depth 606 mm • Maximum Tilt 940 mm • Note (1) * Includes blade tilt cylinder. • RIPPERS - ADJUSTABLE PARALLELOGRAM+MULTI-SHANK • Number of Shank Holes 2 • Overall Beam Width 1330 mm • Weight - With One Shank 4153 kg • Maximum Penetration Force - Shank Vertical 154 kN • Pry-Out Force - Multi-Shank Ripper with One Tooth 361 kN • Maximum Penetration - Standard Tip 798 mm • Total Operating Weight* - With SU-Blade and Ripper 48221 kg • Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 879 mm • Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator. • Note (2) +Includes (1) shank, add 347 kg for each additional shank. • RIPPERS - ADJUSTABLE PARALLELOGRAM SINGLE-SHANK STANDARD/DEEP • Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole 882 mm/817 mm (34.7 in/32.2 in) • Total Operating Weight* - With SU-Blade and Ripper 48784 kg • Pry-Out Force 332 kN/331 kN (74,637 lbf/74,412 lbf) • Weight - With One Shank 4293 kg/4420 kg (9,464 lb/9,744 lb) • Number of Shank Holes 3-Mar • Maximum Penetration - Standard Tip 1231 mm/1727 mm (48.5 in/68 in) • Note (1) * Total Operating Weight: Includes hydraulic controls, blade tilt cylinder, coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU-Blade, Ripper, 610 mm (24 in) ES shoes, and operator. • https://www.cat.com/en_ID/products/ne... • With Mr frans waluyo gepeng • Cat D9R • Cat mining • Mining equipment • Gepeng • Cat equipment
#############################
