How to Use a Zircon StudSensor 70 Stud Finder

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=tmdIk_JM-9g

Zircon StudSensor 70 center finding stud finder with DeepScan mode quickly and easily finds the center and edges of wood and metal studs and joists up to 1 1/2 inches deep. Its easy-to-read LED display indicates the center of studs as well as the stud edges. The patented SpotLite® Pointing System shines a bright beam of light on the wall to identify the target and the WireWarning® detection feature indicates the presence of live AC voltage. • Use the StudSensor 70 stud finder with CenterVision Technology in most of your DIY and home improvement projects to hang pictures, mount shelves and cabinets, and more. • Not recommended for lath plaster walls * • Indoor Use Only * • For more information about Zircon stud finders and other products: • https://www.zircon.com/tools/studsens... • / zircontools • / zircontools • / zircontools • A BRAND NEW 9V ALKALINE BATTERY IS REQUIRED FOR OPERATION. * • https://www.zircon.com/2014/06/11/how... • 1-800-245-9265 Toll-free, Mon - Fri. 8am - 5pm PST (excluding holidays) • Caution: Do not rely exclusively on scanners to locate objects behind a scanned surface. Some objects may not be detectable by your scanner. Use additional information sources such as visible points of entry of pipes and wiring into walls, standard 16” and 24” (41 – 61 cm) stud spacing practices, and construction plans to determine the likely location of hidden objects. Always use caution before drilling or cutting. • WARNING: ALWAYS TURN OFF THE ELECTRIC, GAS, AND WATER SUPPLIES BEFORE PENETRATING A SURFACE. NEVER ASSUME THERE ARE NO LIVE ELECTRICAL WIRES IN A WALL. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN ELECTRIC SHOCK, FIRE, SERIOUS INJURY, AND/OR PROPERTY DAMAGE.

#############################

New on site