Youtor
Mingda Magician X review The perfect beginner 3D printer
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=u53AdgWueNU
The Mingda Magician X is a 3D printer specifically targeted at new users. There’s very little assembly and it has automatic bed levelling, a direct drive extruder and a colour touch screen. • In this thorough review, I’ll put it through its paces printing a range of models in a variety of filaments including PETG - not just PLA - to try and help you decide if this printer is right for you. • If you’re new to 3D printing I’d highly recommend watching at least some of my earlier video that introduces 3D printing with the budget Creality Ender 3: • Creality Ender 3 review | Best budget... • If you want to skip forward or back at any time in this video, please use the chapter markers YouTube creates from the timestamps down below and in the pinned comment. • -------- • You can purchase the printer directly from Mingda: • https://3dmingdaofficial.com/?ref=u4y... • Use this code for $20 off: GRMXUSD20 • or from Amazon: • Mingda Magician X: https://geni.us/PqEaWw • Other Amazon links: • eSun PLA+: https://geni.us/KSbA • eSun ABS+: https://geni.us/y5W4xF • Eryone TPU: https://geni.us/TheP • Magigoo bed adhesive (and release): https://geni.us/NoMmj • 3DLac spray bed adhesive (and release): https://geni.us/7IDz • Textured PEI removeable sheet: https://geni.us/RH32Hqu (I've not upgraded this yet but use an Energetic one on my Ender 3 which I've been happy with) • As an Amazon affiliate, I get a small commission from purchases made via any Amazon links. • Written article: http://thetechnologyman.com • Mingda Facebook group: / mingda3dprinter • Mingda tutorials: / 1534802933581986 • Prints in video: • Vase: https://www.printables.com/model/9826... • Stackable storage containers: https://cults3d.com/en/3d-model/tool/... • A-team van: https://fab365.net/items/147 • -------- • You can find most of the recent tech I've reviewed recently all in one place on my Amazon page. I also have a list some of my recommended tech and my current camera equipment for filming: • UK: http://amazon.co.uk/shop/thetechnolog... • US: http://amazon.com/shop/thetechnologyman • -------- • Music in video from: • Epidemic Sound: • https://www.epidemicsound.com/referra... (FREE 30 day trial with this link) • -------- • Timestamps: • 0:00 Intro • 0:38 Overview. Unboxing, printer assembly • 1:24 Accessories • 1:49 Checks and adjustments after assembly • 2:30 Build quality, size, print volume • 3:35 Automatic bed levelling • 4:09 Loading filament • 5:28 Ports: thumb drive, SD card slot and USB-C. SD card storage slots • 5:59 Performance. V6 style hotend, max print temps • supported filaments, dual Z-axes • 6:24 Updating firmware • 6:38 First print, adjusting Z-offset • 7:25 Glass bed, prints difficult to remove • 8:07 Slicing own models, Cura setup • 8:33 Large, long 11 hour PLA print. Test bed levelling and tolerances • 8:54 Calibration cube, 3D Benchy - check printer performance • 9:18 Spiral mode (vase mode) vase - test Z-axis and extrusion issues • 9:33 Spiral mode (vase mode) stackable storage containers • 9:43 Testing faster print speeds • 10:06 Unloading filament • 10:29 Printing flexible filament • 11:01 Printing ABS • 11:39 Printing PETG (not officially supported) • 11:54 Heated bed temp variations and max temps • 12:03 Sound test - 32-bit mainboard, silent stepper drivers • 12:23 Remove base, power supply fan failure remove and replace • 12:57 3.5 touch screen settings (disable beeps, runout sensor), speed, fan, flow adjustments • 13:17 Octoprint printer control option via USB-C port • 13:27 Testing filament runout sensor and power outage recovery • 13:44 Power consumption idling and printing 20mm test cube (cf Prusa MK3S+) • 14:05 Removing hotend cover JIS screws • 14:25 Conclusions • -------- • #mingda #3dprinting #3dprinter
#############################
