Youtor
XPPen stylus issues and how we fixed them
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=uC3ZHroezM0
Recently we got hold of a few XP-Pen/Ugee devices, but unfortunately one of them is not functioning properly. To be precise, it's the 'PA2' pen that came with an Artist 12 Pro pen display that exhibited the issues, as when we switch to using a 'PA1' pen on the same Artist 12 Pro, all is working fine (except for the well-known no-tilt-reading-near-screen-edge issue). The issues were 1. giving full pressure when not touching, 2. toggling eraser on its own, 3. completely not working near screen edges. At times, there were also ghost clicks on the Windows desktop (i.e. not due to pressure reading) but we didn't film it. Anyway, we somehow got these fixed. See how we did it in this video. At a point during the tuning, we had the pressure reading wrapping around its range, but we didn't film it. This is similar to some pressure errors people are showing on XP-Pen forums. • Note: 1. I removed the outer rim around the buttons (at 1:20) by pushing the long sides inward with your fingernail to unlatch it. 2. There's some red glue in the tip cone part (1:13). Just grip it firm and unscrew it. The right direction: ｗhen the tip is pointing towards you, turn the half-cone part anti-clockwise to unscrew it. 3. If you have a tiny flat screw driver that fits, you just need to remove the sleeve, reveal the tuner and tune it, without disassembling further.
#############################
