DIY Smart Home Control 12V RF 4 Channel 433Mhz wireless Remote Control Switch Module

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=uEUHqZApB2U

433Mhz Universal Wireless Remote Control Switch 12V Relay Receiver Home Automation Modules and 2pcs RF Remote 433Mhz Transmitter • From: • https://www.aliexpress.com/store/prod... • About Working mode: • • 1. Momentary/Jog: Press and hold to on; Release to Off • • Keep pressing one button , the corresponding channel is working /on; • Loosen your finger is stop/OFF . • (4 channel switch(receiver) need 4 button remote control (transmitter )) • • 2. Toggle/Self-Lock: Press to on; Press again to Off • • Press one button for one time , the corresponding channel is working/on; • Press the same button again is stop/OFF . • (4 channel switch(receiver) need 4 button remote control (transmitter)). • • 3. Latched/Inter-Lock: Press to on; Press other button to Off • • Press one button for one time, the corresponding channel is working/on; • Press another button is stop/OFF（At the same time, another corresponding channel works） . • ( 4 channel switch( receiver) need 4 buttons remote control (transmitter). • • • The setting of working mode： • • 1. Momentary Mode: pressing one time the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting momentary mode successfully . • • 2. Toggle Mode: pressing two times the learning key button on the receiver board( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting toggle mode successfully . • • 3. Latched Mode: pressing three times the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press first remote button ,follow on second remote button , signaling three times by remote’s LED indicator informs about setting latching mode successfully ( first button stands for on , second button stands for off ). • • 4. 2CH momentary + 2CH Toggle : pressing four times the learning key button on the receiver board(Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully . • • 5. 2CH Momentary + 2CH Latched : pressing five times the learning key button on the receiver board ( Led indicator on receiver board will signaling simultaneously ),then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully . • • 6. 2CH Toggle + 2CH Latched : pressing six times the learning key button on the receiver board [Led indicator on receiver board will signaling simultaneously] ,then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully . • • 7. 2CH Latching + 2CH Latched : pressing seven times the learning key button on the receiver board [Led indicator on receiver board will signaling simultaneously ],then press any of the remote button , signaling three times by remote’s LED indicator informs about setting successfully . • • 8. Deleting existing remote controls data: pressing eight times the learning key button on the receiver board , the LED indicator on receiver board will flash for eight times , the existing remote controls are deleted successfully. • • • NOTES: • 1. Please do not charged operation, you should shut off the power, and operation after testing and correct electricity. • 2. Please promptly change battery when remote control voltage is insufficient, (when the battery voltage is insufficient, generally get close transmitting ) • 3. Please pay attention to avoid metal mask,large equipment ,strong interference electromagnetic filed when using wireless RF products,and avoid too short distance between the remote control and receiver board . • 4. Please avoid abnormal using of the product.Abnormal using will reduce product performance and life, when seriously it may damage the products and even make danger for your safe . • • What's More: The system can store for 25 pcs of remotes , if the remote get more than 25 pcs , the initial remote control will be lost .

#############################

New on site