REPARACIÓN DE DIRECCIÓN HIDRÁULICA FORD PARTE 1

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=uJUlGwz9F8s

How to disassemble a Ford hydraulically assisted rack. The process begins by cutting the security seals, the terminal on the right side is loosened, the length of the thread is measured, which is 30 millimeters, the nut is removed, the dust cover clamp, then the dust cover, in the same way proceed with The left side. Next, the left and right steering rack, the lower cover of the auger, the auger nut are loosened, then the pinion is hit with a bronze shaft to extract it, then the nut is loosened, the cover is loosened and the spring is removed. Continuing with the work, the central axis insurance, the axis, the ring, the horn along with its seal and oring are extracted. Using the appropriate extractor, the lower pinion seal and the inner cylinder seal are extracted, then the lower pinion bearing, finally the cover and regulator are removed. • Visit: http://hidraulicaveloz.blogspot.com/ • More information: [email protected] • Address: Union 528 Trujillo Peru • Visit: http://yovelpe.blogspot.com/

#############################

New on site