OLD V4 Released RETROPIE ATTRACTMODE HYPERSPINV364GB IMAGE FOR RPI 33

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=uJy3-Rz-yQ4

***NEW VERSION V4 RELEASED: • RPI3/3+ - ATTRACT-MODE HYPERSPIN - V4... • • ***For RPi4 image go to: • • 128gb RPi4 – HYPERSPIN LOOK A LIKE – V.1 • VERSION 3 • Download link at the bottom of the description • I discovered that a essencial file to the original Reset Controller script work is missing, probably because the system update, so I made a replacement. Just copy the file over the network to \\\ etropie\\attractmode\\Attract Mode Setup\\ • link to the file: https://mega.nz/file/H11VmSBQ#TXyvVQ-... • Changelog (from v2 to v3): • Image increased (need minimum 64 GB sdcard) • Download in torrent version • Attract Mode updated to version v2.6.1 • RPi updated until 01/04/2020 • RPi RAM shared: 512MB Video / 512MB System (Still no overclock) • Fixed the “Reset Controller” script; • Fixed ScummVM script issue; • Fixed OpenBOR slowlyness • Added Kodi • Added Steam Link • Added Doom and mods (lr-prboom) (need keyboard to configure) • Added Quake and mods (lr-quake) (need keyboard to configure) • Added Quake 3 Arena (need keyboard to configure) • Added more games to arcade (now there is about 1.6k games) • Added SegaCD games • Added PSX games • Added NDS games • Added Openbor games • Added PSP games • Arcade: new filters for the publishers: • 1) Atari • 2) Banpresto • 3) Nintendo • 4) Taito • 5) Toaplan • 6) Visco • 7) Williams • Modified the collections layout to show the respective system: • The mkarcade driver is disabled. You can enable in retropie - drivers • OBSERVATIONS: • -The image won’t work with the RPI4. • -Works with RPi3 and 3+, with a 64gb min • The mkarcade driver, that allow you to use GPIO controller, was modified to recognize 2 controllers, but that modification prevents you to get the update script, so If you need to update the script,delete the mkarcade file, update the system,then restore the modified file (.bkp). • -The Nintendo DS emulator needs a keyboard for controller configuration. • -The OpenBor emulator also needs a keyboard to first configure the controllers. • Doom, Quake and Quake 3 need keyboard to configure • Ocasional crashes are expected, because AttractMode is heavy and resource hungry. • Some layouts are very heavy SWF, so a slowdown will be noticiable. • -You WILL NEED a cooling method (large heatsinks or fans) to the temp get around 55-60 Celsius and a good power source. • The image was conceived for 64GB card, almost ready to use, but can be used in any sdcard and be increased to higher storage and add new games and arts. • The system has romlists for most plataforms (less openbor, amiga and Scummvm), so If you add a game they should immediately show in the wheel (if has the original name – check romlist for the name – usually the rom has the same name of the art that you will find in the internet), but you will need to add the art and vídeo into the respective folders. • -The romlists (in the case of Amiga, Openbor and ScummVM) need to be remade every time you add a new game. • I recommend to add roms through WinSCP, because RPi3B has many WIFI drops . • The image was compressed with 7zip (https://www.7-zip.org/download.html) and Winrar • FIRST USE: • A) BURNING THE IMAGE • Download the image and burn to the sdcard. I use Win32DiskImager: https://sourceforge.net/projects/win3... • Place the sdcard in your RPi, connect a keyboard, the HDMI and then the power source to load the system. • You will need a keyboard connected to the RPi until configure the controller. • B) CONFIGURING THE WIFI • Once you configure the controller go to “Attract Mode” menu. There go to “Wifi configuration” and configure the Wifi. • C) EXPANDING THE SYSTEM TO USE THE WHOLE SDCARD • Go to “Raspberry Pi” - Advanced Settings - Expand Filsystem • D) CONFIGURING CONTROLLERS • Go to bluetooth if you want to set bluetooth controllers. • If you will use GPIO controllers, enable mkarcade driver. Just go to Attract Mode Setup - Retropie - drivers and install the mkarcade driver. • Then, go either “Emulation Station” or “Reset Controllers” to set the in game controllers. The reset controllers option will erase any pre-set emulator/game configuration. • E) CONFIGURING THE CONTROLLER TO USE IN THE MENU • When the system loads press TAB. Will show a black screen written “Configure”, select “Controls” This will open a control configuration tab for THE ATTRACTMODE MENU, this will not work in games. • F) Changin the aspect ratio of games • If you want change the Aspect Ratio to 4:3 or 16:9 of your games you have to go to - Atrratc Mode - “Configuration editor” • TUTORIALS • You can check the tutorials for most common issues: • • TUTORIAL: CONTROLLER ISSUES WORKAROUN... • DOWNLOAD (TORRENT) • https://mega.nz/file/3w1iQIyI#hsPmelf... • • Thats pretty much it. • Hope you enjoy.

#############################

New on site