RC Sailboat DIY plywood Hull for Gaff Cutter quotFLYER

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=v2PKNSzE6bg

DESCRIPTION: • Photos and video from the build of the original ‘FLYER’. This is a semi-scale model inspired by the legendary English Pilot Cutters. • PDF PLANS for Bearospace boats are available from Bearospace Industries: • http://www.bearospaceindustries.com/b... • PRINTED PAPER PLANS for Bearospace boats are available from Flying Models: • https://store.flying-models.com/catal... • DACRON SAILS for all the Bearospace boats are available from sailmaker Rod Carr: • http://www.carrsails.com/ • The hull construction is plywood over bulkheads, very much like the other Bearospace boats. What sets the Cutter apart from the other Bearospace boats is the sail plan which has 2 (or 3) overlapping headsails. These headsails require a second winch system below decks. The skipper must pull the headsails around to the other side each time the boat tacks, creating a whole new level of involvement for the Skipper when sailing. • Music from Youtube Music Library: • Morning Mandolin - Chris Haugen • Down the Street Blues - Unicorn Heads • My Train’s a Comin’ - Unicorn Heads

#############################

New on site