GNS3 Talks AAA Docker Appliance Easy TACACS amp RADIUS GNS3 servers Part 2

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=vNzZ9lfkRxU

GNS3 now has a AAA Docker Container. This makes it really easy to add RADIUS and TACACS servers to your GNS3 topologies! • For lots more content, visit http://www.davidbombal.com - learn about GNS3, CCNA, Packet Tracer, Python, Ansible and much, much more. • ======================== • R1 config: • ======================== • R1#sh run • Building configuration... • Current configuration : 3388 bytes • ! • version 15.6 • service timestamps debug datetime msec • service timestamps log datetime msec • no service password-encryption • ! • hostname R1 • ! • boot-start-marker • boot-end-marker • ! • ! • enable password cisco • ! • aaa new-model • ! • ! • aaa group server tacacs+ gns3group • server name container • ! • aaa authentication login default group gns3group local • aaa authentication enable default enable • ! • ! • ! • ! • ! • aaa session-id common • ethernet lmi ce • ! • ! • ! • mmi polling-interval 60 • no mmi auto-configure • no mmi pvc • mmi snmp-timeout 180 • ! • ! • ! • ! • ! • no ip icmp rate-limit unreachable • ! • ! • ! • ! • ! • ! • no ip domain lookup • ip cef • no ipv6 cef • ! • multilink bundle-name authenticated • ! • ! • ! • ! • username david privilege 15 password 0 cisco • ! • redundancy • ! • no cdp log mismatch duplex • ! • ip tcp synwait-time 5 • ! • ! • ! • ! • ! • ! • ! • ! • ! • ! • ! • ! • ! • interface GigabitEthernet0/0 • ip address dhcp • duplex auto • speed auto • media-type rj45 • ! • interface GigabitEthernet0/1 • no ip address • shutdown • duplex auto • speed auto • media-type rj45 • ! • interface GigabitEthernet0/2 • no ip address • shutdown • duplex auto • speed auto • media-type rj45 • ! • interface GigabitEthernet0/3 • no ip address • shutdown • duplex auto • speed auto • media-type rj45 • ! • ip forward-protocol nd • ! • ! • no ip http server • no ip http secure-server • ! • ! • ! • tacacs server container • address ipv4 192.168.122.201 • key gns3 • ! • ! • ! • control-plane • ! • ! • line con 0 • exec-timeout 0 0 • privilege level 15 • logging synchronous • line aux 0 • exec-timeout 0 0 • privilege level 15 • logging synchronous • line vty 0 4 • transport input all • ! • no scheduler allocate • ! • end • R1# • ======================== • • Two prominent security protocols used to control access into networks are Cisco TACACS+ and RADIUS. The RADIUS specification is described in RFC 2865, which obsoletes RFC 2138 leavingcisco.com. Cisco is committed to supporting both protocols with the best of class offerings. It is not the intention of Cisco to compete with RADIUS or influence users to use TACACS+. You should choose the solution that best meets your needs.

#############################

New on site