Super Capacitor Battery Bank Construction Video

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=vTa6Zx8zYhY

During this construction video I'll show you how to make a SuperCapacitor bank. These SuperCap's by Maxwell can output some impressive current! • Wiring diagram schematic: https://drive.google.com/file/d/1n8Jr... • Parts used: • 6x Maxwell Boostcap, 2600F, 2.5v, Model: BCAP0010 • 500mm of 2gauge insulated copper wire (Red Black) • 4x 2gauge copper lugs • 12x 16mm long, M8 bolts washers • 2x 22mm long, 3/4 bolts (to fit zinc battery terminals) • 5x M4 x 8mm long, capscrews • 1 set of Zinc battery posts (eBay link:https://goo.gl/d6Pn1d) • 12v battery voltmeter (eBay link: https://goo.gl/S4pPHh) • 1x 12mm mini monetary switch (eBay link: https://goo.gl/z5F8nu) • 1x 6 channel 2.5volt balance board (eBay link:https://goo.gl/KGue5y) • 6x mini heatsinks (eBay link:https://goo.gl/O1upeL) • 4x M3 x 12mm long brass standoffs (eBay link:https://goo.gl/MjB7om) • 4x M3 x 6mm long screws • 4x M3 nuts • Acrylic box 3D part files: http://www.thingiverse.com/thing:2256047 • Information provided in this video is for educational purposes only. • If you attempt to recreate/replicate anything you’ve seen in this Or any other video, you’re doing so at your own risk. • • SCHEMATIX -

#############################

New on site