ESP32 RGB LED Driver Circuit Design Linear Regulator and LED Output Drivers

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=vV0tDvrrLvU

In the previous video, we prototyped our electronics on breadboard. • In this video, we build the complete schematic for a bare-bones ESP32 based circuit that we will turn into a PCB for manufacture with JLPCB (https://jlcpcb.com/) • I'm looking forward to turning this into a PCB and getting it manufactured. Getting closer to finishing this project! • If you enjoyed this video please subscribe to the atomic14 channel by clicking here: / @atomic14 • Bill of materials for the schematic along with LCSC product codes ( https://lcsc.com/) • EasyEDA project is here: https://easyeda.com/chris_9044/youtub... • Regulator • AMS1117-3.3 - C6186 • 100nF - Input capacitor 1 - C1525 • 10uF - Input capacitor 2 - C7171 • 10uF - Output Capacitor 1 - C7171 • 100nF - Output capacitor 2 - C1525 • Brains • ESP32 Wroom Module - C95209 • 10uF - Decoupling capacitor - C15525 • Enable pin RC circuit • 12Kohm - C25752 • 100nF - C1525 • Output Drivers • MOSFET - C20917 • 470 ohm - Gate resistor - C25117 - • 470 ohm - Pull up resistor - C25117 • 5.1ohm 1 Watt - LED resistor - C73113 • Indicator LEDs • LED - C72038 • Resistor - C25087 • --- • • Want to help support the channel? I'm accepting coffee on https://ko-fi.com/atomic14

#############################

New on site