Tips Drilling into soft ceramic tiles wall

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=vsD0uqlB2-4

Tips: • As we can see, I made holes along the line between the tiles. It is easir to drill, because the filling is softer. At the same time, we can get a leveled straight line. :) • 1) Make a small hole using center punch. • 2) Drill using 6 mm masonry drill bit, with rotary hammer. • 3) Put a nylon/plastic 6mm wall plug. • 4) Drive the screw. • Most of the itme, I am using Makita TD0101F impact driver to drive screws, but today, I am using 1/4 hex to SDS+ adapter, which, I can use Makita HR2810 rotary hammer to drive the screw. • IMHO, it is not that practical to use big rotary hammer to drive screws. The HR2810 rotary hammer weight is 3.2 kg, and this a 2 hands operated power tools. So, it is a difficult to control the screw before you can start driving it. It is nice to have the adapter, as a spare or backup for impact driver. • Please feel free to visit the discussion here. Comments are welcomed. • http://forum.lowyat.net/topic/2051914 • http://forum.lowyat.net/topic/2234276

#############################

New on site