How to set the time NAVIFORCE NF9144 Functional Explanation All the modes

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=vtJNQ4gCteo

This video aims to introduce the operational steps of different functional modes of Naviforce watch. • We got the NF9144 with five functional modes. • • The button on the top left side of the face of the watch is named button A. • In counterclockwise order, the second button is button B, the third one is button C and the fourth one is button D. • The mark displayed in this area is a simple criteria for judging what function is operated. • When the week mark appears on the display, such as MON, indicating Monday, it turns out that the watch is in the Timer Mode. • When ALM appears, it indicates the alarm mode, STP indicates stopwatch mode/Chronograph Mode, DT indicates Dual Time Mode, and TR indicates Countdown Mode. • Press B to change your watch into the mode you want. • Set the time, such as 17:10, October 29, 2018. • First of all, press B button to select the Timer Mode. • And press C for two seconds to enter time setting state. • Second will blink. You can press A to adjust “Second” to zero. • And then press B to select the other items in turn. • Press button A to adjust the flashing item, like adjusting the value of minute to be 10. • The minute setting is done. Press B to switch into “hour” and adjust it to be 17. • Finally, press button C to confirm. • Press D to switch between 12- / 24-hour time formats in Timer Mode. • • Press B button to select the Alarm Mode. • Press A and you can see that -1，-2，-3，-4，-5 or a blank would appear on the right of display. These signals respectively correspond to AL1，AL2，AL3，AL4，AL5 and normal alarm pattern. • When pressing A to switch into the display of blank, you can press D to activate / deactivate the hourly chime function. • A horizontal line will appear on the label of SIG when activating the hourly chime function. • Alarm AL1 is equipped with snooze function. If we would like to set 7:20 as AL1, after pressing A to switch into AL1 with a signal “-1”, press button C for 2 seconds to enter alarm time setting state. Hour will blink and a horizontal line will appear on the label of AL1, which shows that the AL1 function has been activated. • And than press button A to adjust the value to be 7. • Press B to select another item : Minute. And press button A to adjust the value to be 20. • Press C key to confirm and return to AL1 pattern. • At this moment, Press D again to activate snooze function with a horizontal line on the label of SNZ. • If you press D again, the AL1 function and snooze function will be deactivated. • After the snooze function is activated, it will utter “beep” sounds every 5 minutes for 7 times. • The alarm would alarm for 10 seconds when reaching the preset time. Press any button to stop the alarm. • Press B button to select the Chronograph Mode. • Press button D to start timing and press button D again to stop timing. When stopping timing, press C to adjust “Second” to zero. • If you would like to have split timing measurement, press button D to start timing firstly. Press C to activate split timing measurement with the signal of SPL. Press C to deactivate the split timing measurement. Press D to stop the timing and press C to reset the mode finally. • If you want to get the finish time of two competitors, you need to press button D to start timing. And press C to activate split timing measurement when the first competitor breasts the tape, indicating his finish time. When the second competitor breasts the tape, please press D. And press A again to deactivate the split time measurement, indicating the finish time of the second competitor. Press C to reset the mode finally. • Press B button to select the Countdown Mode. • For example, we have to set a countdown of 2:45. Press button C for 2 seconds to enter countdown setting state. Hour will blink. Press A to adjust the value to be 2. • Press button B to switch to“Minute”and also press A to adjust the corresponding figure, 45. • Press C to confirm and return to countdown displaying mode. • When time is set, press D to start the countdown function. After pressing D to stop the countdown function, you can press C and timer will automatically reset to the preset time: 2:45. • When the timer counts to 0 second, the countdown function will stop automatically. It will alarm for nearly 10 seconds. Just press any button to stop the timer. • Available: • Aliexpress: https://naviforce.aliexpress.com/stor... • Twitter: / naviforcewatch

#############################

New on site