A Look Inside Luxman M120a Power Amp











>> YOUR LINK HERE: ___ http://youtube.com/watch?v=vvj13GH7te8

#luxman, #LuxmanM120a, #poweramplifier • This is my first video using iMovie. I hope you enjoy it. • I pulled out my Luxman M120a amplifier to replace my M2000 amp. I go over the specs of the amp and then remove the amp from its wooden case to look at the components inside. Next I use Deoxit products to clean the attenuator pots, switches, RCA connectors etc. before placing it in the cabinet. Finally, I show the LED VU meters in action. • If you use two of these amps you can then bridge them. Meaning each amp could serve like a monoblock amp and the total watts would jump from 120 watts (stereo) to 300 watts per channel (per amp). • Frank Landry’s Channel 33 RPM -    / mrnoneedforaname   • Channel 33 RPM Facebook -   / channel33rpm   • The Idiot’s Guide to Using Deoxit (revisited) - https://audiokarma.org/forums/index.p... • Luxman M120a specs on HiFiEngine - https://www.hifiengine.com/manual_lib... • • Luxman M120a info. on the Vintage Knob - http://www.thevintageknob.org/luxman-... • • Music: Take Five, Time Out, Dave Brubeck Quartet, Columbia

#############################









New on site
Content Report
Youtor.org / YTube video Downloader © 2025

created by www.youtor.org