Youtor
labelling Machine Guide Germark Set Up
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=w-x_GNuINJw
Current labelling machinery stock page: http://www.sc-packaging.com/scpackagi... • Setting Up Automatic Labelling Machine Self-adhesive. We also buy and sell packaging machinery go to www.sc-packaging.com for more information. • 1. Select the container to label together with the relevant labels rolls. • Place a container on the conveyor. • 2. Datum • Wraparound labelling the scroll feed is the datum line to work from set the dispensing edge and guide rails to this point • Set guide rails to this point. • 3. Set the label on the container at the correct height using vertical adjustment on application head. Adjust the label head so that the dispensing edge is close to the rotating roller. The container must not contact the web of the labels this can cause ripping and label application problems. • Once the labelling machine is adjusted start to set the label settings • Label over hang (the mount of label showing over the edge of the dispensing edge) • Label application delay (the time from the product center to the label being applied) • Note the bottle should be guided but not held back by the guide rails • It is important to set the correct clamp presser on the product so that it is firmly held and turning freely. This is adjusted with the clamp handle underneath the twin roller clamp. • Maintenance • Daily • The machine should be kept clean, and free from labels and spilled products • Check web rollers and label dispensing beak are free from adhesive build up and clean • Check that product detection optics are clear and clean • Ensure all screw threads and slides are kept lightly lubricated and clean (do not us silicon lubricants) • Monthly • Check the product conveyor belt for signs of wear • Check drive belts for tension sign wear. • S.C.Packaging Technology • www.sc-packaging.com
#############################
