marsgizmo Filament Bunker V2 how to keep your 3D Printing Filament dry

YOUR LINK HERE:

http://youtube.com/watch?v=w2T6HxC_8cE

This is my marsgizmo Filament Bunker V2, to store your 3D Printing Filaments Dry. • You can get the FREE design and more details from here: https://bit.ly/2QK7sUs • 👇🙂 more details • _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ • More details here (same are also in the linked design): • These are my affiliate links. • For each individual Filament Bunker you need: • 1 x cereal container • 4 x bearings • 1 x about 50cm (20”) of PTFE tube • 1 x PTFE connector (for 4mm OD PTFE tube) • 50 grams (1/2 cup) of Silica beads • 3D Printed Parts (1 x Base, 1 x Silica Lid, 2 x Cylinders). No supports needed for printing. • The box with big handgrips can hold Spools of 60mm width (usually 750g Spools) and the new one can hold 67mm width (usually 1Kg Spools). • The Cereal Container for 750g Spools (try getting the one below instead): https://geni.us/pSLAo • I recommend to get the new containers instead (like mentioned in the video, good for 1 Kg Spools): https://geni.us/nrcXpYG • I will try to update in a few weeks the design to fit 1 KG Spools. • The existing V2 design is still compatible with these new Spools (will just hold 750 grams Spools) • The volume of both containers is 4 liters (16.9 Cups, 135.3oz), DO NOT GET the smaller version! • • Using regular 608 ZZ (or 2RS) skateboard bearings: • pack of 10: https://geni.us/uLMvbQ • or pack of 100: https://geni.us/OiChoH • PTFE tube and connectors. I recommend 3mm ID / 4mm OD, but you can also use regular 2mm ID / 4mm OD • (ID - Inner Diameter, OD - Outer Diameter) • 3mm ID / 4mm OD: https://geni.us/NIfXBG4 • 2mm ID / 4mm OD: https://geni.us/4YjDen • M10 PTFE connector: https://geni.us/JQRSNXl • Silica Beads: https://geni.us/mRIfUM • Or get them in 5g packages: https://geni.us/5Bfq • _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ • Printing details: • no supports needed! • can easily be printed from PLA (try to use quality PLA), otherwise go with PETG. • 0.2mm layer height for better quality, but also 0.3mm layer height works fine (lower quality) • _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ • 3D printing Filaments: • Gold: Extrudr Biofusion Gold Filament: https://geni.us/3VQkkFK • (Another similar one: https://geni.us/v5Bwq) • Red PLA filament: https://geni.us/RpCQ • Blue: Extrudr NX2 Blue filament: https://geni.us/NHa9Lso • Purple: Fillamentum PLA Extrafill Vertigo Mystique • White PLA filament: https://geni.us/0AUGd0C • Fillamentum Vertigo Jade Green: https://geni.us/orOMQSr • Blue PLA filament: https://geni.us/uMV3 • Sparkly Black filament: https://geni.us/2cRfUB • • Good entry level 3D Printer: • Amazon: https://geni.us/ender-3-v2 • Bannggood: https://geni.us/yPoJc • Auto Bed Levelling 3D Printer: • Amazon: https://geni.us/lXww • Banggood: https://geni.us/Fluw9Fx • Big format 3D Printer: • Amazon: https://geni.us/9Prm4 • Banggood: https://geni.us/1nDLcbO • _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ • If you like my videos, please support me with a Like and Subscribe. • It helps me create more videos.. and I'll be forever grateful ❤️ • _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ • My Instagram Channel: / marsgizmo • My Twitter: / marsgizmo • My TikTok: https://vm.tiktok.com/ZMe9vkLdh/ • _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ • Download the FREE design from here: https://bit.ly/2QK7sUs • _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ • This video is Sponsored by Thangs.com • Their support helps me create nice videos for you 😊 • #marsgizmo #shorts

#############################

New on site