How to use Infinix Flash Tool

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=wIjc4_gcFSM

Download links Text format @ https://forum.hovatek.com/thread-9224... • This video explains how to use Infinix Flash Tool • Drop a comment below if you have questions or reach out to us on the following platforms: • Website: https://www.hovatek.com • Facebook: / hovatek • Twitter: / hovatek • Google+ : https://plus.google.com/+Hovatek • 00:22 • In this video tutorial, I'll be explaining how to use Infinix Flash tool. • 00:27 • Now, it pretty much works the same way SP Flash tool does only that its a lot simpler. • 00:36 • Fewer configuration options, just load your files and flash. That's basically how this one works. • 00:42 • Now, before you use Infinix Flash tool, first you need your rom (firmware) you wish to flash (extracted here) • 00:55 • and then you need to install your Mediatek USB VCOM drivers. The first thing you'll do will be to install drivers. • 01:04 • Without VCOM drivers, the tool will not be able to detect your phone. Once you connect your phone for flashing, • 01:10 • the best you could see is just a charging sign on the screen, no flashing will start. • 01:16 • You'll have to go to device manager, just click on any item on the list then click on Action, • 01:24 • Add legacy hardware, Next, Install the hardware that I manually select from a list, Next, Next, • 01:36 • Click on Have Disk, Now you click on Browse. Now, you navigate to the location of your Mediatek VCOM driver, • 01:45 • this is mine here, let me take you back. Mediatek VCOM drivers, Drivers, USB VCOM driver. • 01:55 • Now, you select the folder according to your PC's specs. I'm using a Windows 8 so I'm going to select the • 02:02 • Windows 7 driver. Now, mine is a 64 bit PC so I'll select 64. If yours is 32 you'll want to select this. • 02:14 • Click Open, OK, Next, Next. If you get a prompt telling you that this driver is not signed • 02:29 • and do you want to proceed? You'll want to click a Yes for that. The reason why you're getting this code 10 error • 02:35 • is because the driver you just installed is not digitally signed so Windows believes it might not exactly work • 02:44 • but that really doesn't matter. What you're after is that the following driver was installed • 02:49 • Mediatek DA USB VCOM Port. So VCOM drivers have been installed so you click on Finish. • 02:56 • Now, back to flashing. Now, we have our drivers installed so the first thing you'll want to do is to launch your • 03:04 • Infinix Flash Tool. You right-click and run as Administrator and wait for the tool to come up. • 03:23 • Its pretty much the same as SP Flash tool. You'll see that the settings are a lot simpler. • 03:31 • For SP Flash tool, you have a lot of options at the top which allows you to select which files you wish to flash. • 03:37 • With this, it doesn't exactly work that way but that doesn't matter. The first thing you'll want to do is to • 03:44 • at this point switch off your phone and don't yet connect it to PC via the USB cord. • 03:52 • You just switch off the phone and leave it the way it is. Now, you click this Browser button • 04:02 • then you navigate to the location of the backup (firmware) you wish to flash This is the stock backup • 04:14 • I wish to flash or the stock rom. You open, select the scatter file and click Open. • 04:22 • Now, we have the file loaded here. The next thing you'll want to do is click Start. You'll see that Start is greyed • 04:32 • and Stop is green in color so that means we're good to go. Now, connect the switched off phone to the PC • 04:42 • via the USB cord and then flashing should begin. I'll do that just now. • 04:50 • OK, so flashing has begun. Its very important you do not interrupt this process. Leave it to complete • 04:59 • before you disconnect the phone and then boot it up. Do not interrupt this process. • 05:04 • Alright! flashing has begun so I just wait till 100% before I disconnect. Alright! Flashing was successful • 05:20 • and I have this green OK prompt. Now, if the phone is stuck at boot logo after flashing, just • 05:27 • just take out the battery (if removable) but if inbuilt, just boot into recovery mode and do a factory reset • 05:34 • and you should be taken to the setup wizard. -------------------------- • Hire Or Consult Us • https://www.hovatek.com/remote • Join Our Training • https://www.hovatek.com/training

#############################

New on site